Sunday, January 1, 2012

The Secret Resetter Code for Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265 Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650

Advertisement:


1. Unplug Power Cord
2. Hold POWER and RESUME buttons
3. Plug in Power Cord
4. Release buttons
5. Open front door of printer
6. Hold the CARTRIDGE and RESUME buttons
7. Press POWER
8. Release all buttons after the beeps
9. Press CARTRIDGE once
10. Press RESUME

The Secret Resetter Code for Canon BJC-5000

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME four(4)times. The indicator should be GREEN.
5. Press Power to set data

Service Test Print

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 2 times. The indicator should be GREEN.
5. Press Power to Print

Nozzle Print

1. Power off printer
2. Press and POWER, until the printer beeps and release.

Demonstration Print

* While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

The Secret Resetter Code for Canon BJC-5100
Self Test

* Switch Printer off. Hold Power for 1 beep.

Waste Counter Reset

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 4 times. The indicator should be GREEN.
5. Press Power to set data

Service Test Print

1. Power off printer
2. Press and hold RESUME then press POWER, The indicator will start blinking.
3. While the indicator is blinking , Press RESUME twice then Wait until the printer beeps to indicate service mode
4. When the indicator lights steady GREEN, press RESUME 2 times. The indicator should be GREEN.
5. Press Power to Print

Nozzle Print

1. Power off printer
2. Press and POWER, until the printer beeps and release.

Demonstration Print

* While the printer in ON , , Press and hold RESUME until the printer plays a melody of beeps.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.